5 port GigE Switch with 4 POE+ ports

GRAB-G-GigE-SWITCH-4XPOE is a GigE switch with 4 PoE ports and 1 non-PoE port. it's ideal for connecting 4 industrial PoE GigE cameras to  your PC.

Wall Mounting Procedure

On the bottom of the panel, there are two mounting holes. You need to drive two screws into the wall, then mount the switch on the wall. Note that the switch should be mounted on the wall upright rather than sideways.
1) Determine the location on the wall where you want to mount the switch.
2) Mark the wall where the two mounting holes are. The distance between the two marks must be 39mm (the same as that between the two mounting holes of the switch).
3) Drive  the  screws  into  the  wall  at  the  marks  using  the  screw  driver.  The distance from Screw-Head to Wall should be at least 1.5mm.
4) Mount the switch on the wall

Powersupply

An external 230V poweradapter (EU plug) is included. The adapter is 54V / 1.3A.

Other specifications

Dimensions: 99x98x25mm
Operating temperature: 0-40 degree